Features
◆ Fiber Optic Loopback Tester is typically used for test and measurement procedures in networking environments
◆ Protective dust cover included for protection during storage
◆ Optional Push-pull tab for quick disconnect
◆ Ideal for a multitude of applications that require signal looping in a MTP/ MPO form factor
◆ Optical fiber type: SM (G652D/G657A2) or MM (OM4 BI, OM3BI), specific fiber optional
Application
◆ Optical network equipment self-test
◆ Optical fiber integrated wiring
◆ System loop testing
◆ 100Gb optical testing
◆ Optical fiber loop testing
◆ Network diagnosis and testing
◆ Storage LAN application
Specification
1. Operating & Storage Temperature
| | Parameters | Min | Max | Unit |
| 1 | Operating Temperature | -40 | 70 | °C |
| 2 | Storage Temperature | -40 | 70 | °C |
2. Optical Performance
| Optical Performance |
| Item | Parameters |
| MTP/MPO Connector | SM (1310nm/1550nm) | MM (850nm) |
| Standard | Low Loss | Standard | Low Loss |
| Insertion Loss | Typical | 0.50dB | 0.20dB | 0.50dB | 0.20dB |
| Maximum | 0.70dB | 0.35dB | 0.70dB | 0.35dB |
| Return Loss | ≥60dB for APC | ≥20dB for PC |
| ≥40dB for PC | -- |
| Male/Female | Male: with Pins, Female: without Pins |
3. Geometry Parameters
| Measurement | Pass/Fail Limits |
| Parameters | Min | Max |
| Radius of Curvature | Long Axel | 2000nm | ∞ |
| Short Axel | 50mm | ∞ |
| Angle | Long Axel | -0.2° | 0.2° |
| Short Axel | APC | 7.8° | 8.2° |
| PC | -0.2° | 0.2° |
| Fiber Height | 1000nm | 3000nm |
| Different Fiber Height | N/A | 500nm |
| Adjacent Fiber Height | N/A | 300nm |
| Ferrule Length | 7.9mm | N/A |
4. Details Picture
Product Advantages
◆ Our service is qualified. We insist on responsive and knowledgeable service to each customer.
◆ We have a high production capacity. Standard patch cord capacity is 15,000 connectors/day and MT product capacity is 3000 connectors/day.
◆ We passed many quality system vertification, like ISO, RoHS; and passed the Supplier Audition of the key account.
◆ Our testing standard is much rigorous. Every cable is tested individually in our production line as well as 100% tested by the QC department.
ORC QC Process Flow Chat
FAQ
1. Q: What's your average lead time?
A: Our lead time is controlled within 5 working days for the regular products. For the MT products, our capacity is 3000 connectors per day.
2. Q: What's the difference between MTP and MPO connector?
A: First of all, MTP connector is fully compliant with all of the MPO connector. MTP, developed and manufactured by the American connectivity specialist US Conec, is a kind of high performance MPO connector with multiple innovative design. So its cost is higher than MPO connector. But there are still some cost-effective choices, such as Senko, Nissin, EZconn, FIEL brand MPO connectors.
3. Q: Can you produce according to the samples we send you?
A: Of course, we can produce according to your samples or technical drawings.
