Single Mode ORC Duplex Fiber Optic Patch Cord With Flexible Boot
Fiber Optic Patch Cord Lc Lc Duplex Single Mode With Flexible Boot
Definition of Duplex LC Patch cord with Flexible boot
ORC duplex LC patch cords with flexible connector boot are available on any single mode or multimode patch cord. They are designed so the installer can pre-bend the boot into any direction or angle. This position is maintained for optimal network performance but, can be reshaped at any time or straightened for connector disconnect. This enables perfect installation of the connector in unique applications such as, tight constraint areas or high density environments. These fiber optic patch cords with LC flex boots are ideal for cable management situations where additional fiber bend protection is desired.
Fiber optical patchcord parameters
| Characteristics | Unit | Value/Performance | | Comments |
| | | SM | MM | |
| | | APC | PC | | |
| Basic |
| Insertion Loss(IL) | dB | ≤0.3 | IEC61300-3-4 |
| Insertion Loss(RL) | dB | SPC≥45 UPC≥50 | ≥60 | ≥23 | IEC61300-3-6 |
| Endurance | dB | △IL≤0.2 | IEC61300-2-2 |
| Operation Temperature | ℃ | -20 to +70 | |
| Speration Temperature | ℃ | -40 to +70 | |
| Ferrule end-face geometry |
| Radius of curvature(R) | mm | 7-25 | 5-12 | NA | Telcordia GR326(4.4.5) |
| Apex offset | um | ≤50 | NA | Telcordia GR326(4.4.5) |
| Fiber protrusion | nm | ≤50 | ≤100 | NA | Telcordia GR326(4.4.5) |
| Fiber under cut | nm | ≤125@R=7-10 | ≤100 | NA | Telcordia GR326(4.4.5). For PC, under cut≤-0.02R³+1.3R²-31R+325 when R=10-25mm |
| Mechanical | | | | | |
| Drop | dB | △IL≤0.2 | IEC61300-2-12, 1.5m, 5 drops, no damage |
| Vibration | dB | △IL≤0.2 | IEC61300-2-1, 10-55Hz, 0.75mm amplitude, 0.5hrs/axis |
| Flex | dB | △IL≤0.2 | Telcordia GR326(4.4.3.2), 0.6kg, ±90°, 100cycles, for 2mm or larger cable |
| Twist | dB | △IL≤0.2 | Telcordia GR326(4.4.3.3), 1.35kg load, ±2.5 turns, 10cycles, for 2mm or larger cable |
| Pull proof | dB | △IL≤0.2 | Telcordia GR326(4.4.3.4), 2.3kg at 90°, 6.8kg at 0°, for 2mm or larger cable |
| Coupling strength | dB | △IL≤0.2 | IEC61300-2-6, 4.2kg, 2min |
| Static bending | dB | △IL≤0.2 | IEC794-1-2, 60mm diameter 10 turns |
| Crushing | dB | △IL≤0.2 | IEC794-1-2, 102kg for 2mm or larger cable, 10.2kg for 900um cable |
| Environmental | | | |
| Cold | dB | △IL≤0.2 | IEC61300-2-17, -20℃, 96 hrs |
| Dry heat | dB | △IL≤0.2 | IEC61300-2-18, 70℃, 96 hrs |
| Damp heat | dB | △IL≤0.2 | IEC61300-2-19, 40℃, 95% RH, 96 hrs |
| Transmission | | | |
| Characteristics | Unit | G652 SM | G655 SM | Std. 50um | 62.5um | OM2 | OM3 |
| Max. Attenuation | dB/km(nm) | 0.4/0.3(1310/1550) | 0.3(1550) | 2.8(850) | 3.0(850) | 2.8(850) | 2.8(850) |
| Min. Bandwidth | MHz km(nm) | - | - | 500/500(850/1300) | 200/200(850/1300) | 750(850) | 2000(850) |
| Dispersion coefficient | ps/nm² km | ≤3.0(1310nm) | 2.6-6.0(1550nm) | - | - | - | - |
Features of SM G652D Duplex Fiber Optical Patch Cord
◆ OS1/OS2 fibre conforms to ITU-652.D,TIA/EIA 492 CAAA simplex and duplex assemblies;
◆ Low smoke zero halogen(LSZH) jacket in yellow colour 900um tight buffer;
◆ SC, LC, ST, FC, MU and E2000 connectors;
◆ Different connector performance range for specific application and armoured option also available;
◆ Factory terminated & tested with guaranteed quality;
◆ Duplex assemblies available with clips (SC and LC);
Applications of Duplex Patchcord
◆ Data centres - Support high speed multi channel video, data and voiceservices in metropolitan and access networks;
◆ Passive Optical Network PON WDM/DWDM;
◆ CATV/VIDEO/FTTH;
◆ ATM, SONET and WDM;
Drawing and cable length tolerance
| Length Tolerance |
| L<1M | ±0.08M |
| 1M≤L<20M | ±0.10M |
| L≥20M | ±1%M |
Product Tags:
|
|
Single Mode ORC duplex Fiber Optic Patch Cord With Flexible Boot Images
|
